Oct 21
adminlaptop DIY, how to, laptop, memory card
After you have a good weekend with you family, yes you take a lot photos with your Canon Camera. When you want to store them in your laptop. How do you do that? Oh you know “Using a Memory card reader to install the camera memeory card in your computer. But how to use the memeory card reader in laptop with Dell inspiron 6400 battery?
Removing a Memory Card or Blank
Note: Before you begin of procedure in this section, please follow the safety instructions in Dell Inspiron 1300 Battery Product Information Guide .
Note: in the notification area (click on the icon) and select the card before, you can use the memory card’s configuration utility from the ability to stop and remove from your Inspiron 1525 Battery computer. If the card does not stop the configuration utility, you may lose data.
Press and release it from the card reader slot. When it is emitted partially, remove the card.
Method of Memory Card Installation
Note: Before you begin of procedure in this section, please follow the safety instructions in Product Information Guide .
If your computer laptop battery is running and you install a memory card into your computer. The computer automatically detects the card.
In general, the memory card label symbols, triangles and arrows (and) will be marked to indicate the end inserted into the slot for and with. Key to prevent incorrect insertion of the Dell Inspiron E1505 Battery card. If not clear if the orientation of the card, please refer to the documentation that came with the card.
Hold the card with the top side facing up.
Slide the card into the slot until the card is completely seated in its connector.
Cases, too much resistance occurs please do not force the card. Check the card orientation, please try again.
The computer recognizes the device driver automatically load the VGP-BPS8 appropriate memory card. If the configuration program, to load the manufacturer’s drivers, the media comes with a memory card you use to tell if applicable.
Usually we suggest you install the Memory card when the battery in, as the sudden power off can damage the card.
The article via laptop battery blog
Jul 22
adminBattery technology CPU, DIY, home, laptop, replace, shopping
The CPU is the portion of a computer system that carries out the instructions of a computer program, and is the primary element carrying out the computer’s functions. The processor is essentially the brain of the laptop , with faster processors leading to faster computing time. So if our laptop CPU failed, our laptop can not start and work. We must remove the CPU and replace a new one. Sometimes the old version CPU can not afford our working and playing work, the laptop become very slowt then we should replace them.
Follow these instructions before beginning.
- Remove the CPU thermal cooling system
- NOTE: To prevent damage to the Dell Inspiron E1505 Battery CPU, hold the screwdriver so that is perpendicular to the lever of the CPU when turn the screw off.
- To loosen the ZIF socket, use a small screwdriver and rotate the ZIF socket cam screw counterclockwise until it comes to CAM-Stop.
1 ZIF-socket cam screw 2. ZIF socket
NOTE: To play the maximum cooling of the CPU , do not touch the heat transfer areas of dell vostro 1000 battery CPU thermal cooling assembly. The oils of your skin, can reduce the ability of transfer heat from a heating pad.
NOTE: When removing the CPU, pull the module up. Be careful not to bend the pins of the CPU.
- Lift the CPU ZIF socket.
Replacing the CPU
NOTE: Do not touch the CPU die. Press and hold down the CPU on the substrate mounted by the dice, while the screw to prevent intermittent contact between the screw and the CPU.
NOTE: Make sure the cam lock in the fully open position before inserting the Dell Inspiron E1705 Battery CPU. Be the CPU correctly in the ZIF socket does not require force. A CPU is not positioned correctly can result in a dropped connection or permanent damage to the microCPU and ZIF socket.
NOTE: If a new CPU is installed, you will receive a new thermal cooling assembly, installation of a heating pad or you will become a new heating pad with a sheet containing an appropriate facility to illustrate.
- Align the pin 1 corner of the CPU with pin-1 corner of the ZIF socket, then insert the dell vostro 1400 battery CPU.Note: The pin-1 corner of the CPU is a triangle, which coincides with the triangle in a corner pin ZIF socket
If the CPU is in place, the four corners are aligned at the same height. If one or more corners of the module higher than the other does not, the module is correctly aligned.
1 ZIF socket Cam screw 2 ZIF connector 3 pin-1 corner
NOTE: To prevent damage to the CPU, hold the screwdriver so that is perpendicular to the lever of the CPU to turn the screw.
- Pull the ZIF socket by turning the screw clockwise to the CPU, to ensure secure CPU to the motherboard.
- Replace the laptop battery CPU cooling thermal assembly (see Replacing the Cooling Assembly CPU heat).
RSS